Z-010RS Spare parts
Select now
It doesn't get any easier than this:
- Hover to select
- Click to go to the item
- Add to car
• Classic RS housing: the housing forms the tool body and carries its associated connections and components
• Fits Z-010RS
• Identification: Z-010RS, position 1
• Replacement for the associated component location
• Match the tool version and existing component
• trigger pin: this pin belongs to the trigger mounting
• Fits Z-010RS, Z-020RS, Z-011RS, Z-010S, Z-020S, Z-014RS
• Identification: Z-010RS, position 2
• Replacement for the associated component location
• Match the tool version and existing component
• trigger retaining screw: this screw secures the associated components at their designated connection
• Fits Z-010RS, Z-020RS, Z-011RS, Z-010S, Z-020S, Z-010, Z-020, Z-014RS
• Identification: Z-010RS, position 3
• Replacement for the associated component location
• Match the tool version and existing component
• paint finish trigger: the trigger is the operating lever used to actuate the tool
• Fits Z-010RS, Z-020RS, Z-011RS, Z-014RS
• Option: paint finish
• Replacement for the associated component location
• Match the tool version and existing component
• valve assembly retaining screw: this screw secures the associated components at their designated connection
• Fits Z-010RS, Z-020RS, Z-011RS, Z-010S, Z-020S, Z-010, Z-020, Z-014RS
• Identification: Z-010RS, position 7
• Replacement for the associated component location
• Match the tool version and existing component
• Classic RS housing: the housing forms the tool body and carries its associated connections and components
• Fits Z-010RS
• Identification: Z-010RS, position 1
• Replacement for the associated component location
• Match the tool version and existing component
• container with cap and gasket: this container set combines the cup with its closed cap and matching gasket
• Fits Z-010RS, Z-020RS, Z-011RS, Z-010S
• Option: with cap and gasket
• Replacement for the associated component location
• Match the tool version and existing component
• pickup tube with weight: the pickup tube carries cleaning liquid from the container into the associated cleaning assembly
• Fits Z-010RS, Z-020RS, Z-010S, Z-020S, Z-010, Z-020
• Option: with weight
• Replacement for the associated component location
• Match the tool version and existing component
• container cap gasket: this gasket serves the assigned connection or valve location
• Fits Z-010RS, Z-020RS, Z-011RS, Z-020S
• Identification: Z-010RS, position 28
• Replacement for the associated component location
• Match the tool version and existing component
• container cap retaining nut: this nut retains its assigned threaded connection on the tool
• Fits Z-010RS, Z-020RS
• Identification: Z-010RS
• Replacement for the associated component location
• Match the tool version and existing component
• container cap with hole and valve: this cap belongs to the cleaning gun's container connection
• Fits Z-010RS, Z-020RS, Z-011RS, Z-010S, Z-020S
• Option: with hole and valve
• Replacement for the associated component location
• Match the tool version and existing component
• switching valve screw: this screw secures the associated components at their designated connection
• Fits Z-010RS, Z-020RS, Z-010S, Z-020S, Z-010, Z-020
• Pack quantity: 1 piece
• Replacement for the associated component location
• Match the tool version and existing component
• threaded switching valve: the switching valve belongs to the tool's control assembly and serves its designated switching point
• Fits Z-010RS, Z-020RS, Z-010S, Z-020S
• Identification: Z-010RS, position 24
• Replacement for the associated component location
• Match the tool version and existing component
• inner tube: the inner tube belongs to the cleaning assembly's tube routing
• Fits Z-010RS, Z-010S, Z-010
• Identification: Z-010RS, position 23
• Replacement for the associated component location
• Match the tool version and existing component
• Classic and Basic nozzle options: the nozzle forms the funnel or outlet of the cleaning assembly
• Fits Z-010S, Z-010RS, Z-014S, Z-014RS
• Option: standard or steel inlay
• Replacement for the associated component location
• Select the required version before ordering
• blue weighted rotation tube: the weighted rotation tube operates inside the outlet funnel
• Fits Z-010RS, Z-010S, Z-010, Z-014RS
• Option: blue
• Replacement for the associated component location
• Match the tool version and existing component
• O-ring 2 x 1 mm: this O-ring seals its assigned connection in the tool
• Fits Z-010RS, Z-020RS, Z-011RS, Z-010S, Z-020S, Z-014RS
• Option: 2 x 1 mm
• Replacement for the associated component location
• Match the tool version and existing component
• side cap screws 4 pieces: this screw secures the associated components at their designated connection
• Fits Z-010RS, Z-014RS
• Pack quantity: 4 pieces
• Replacement for the associated component location
• Match the tool version and existing component
• O-ring 9 x 2 mm: this O-ring seals its assigned connection in the tool
• Fits Z-010RS, Z-020RS, Z-007, Z-011RS, Z-010S, Z-020S, Z-020, Z-014RS
• Option: 9 x 2 mm
• Replacement for the associated component location
• Match the tool version and existing component
• 1/4 inch swivel air nipple: this air nipple connects the compressed air supply to the tool and includes a swivel joint
• Fits Z-010RS, Z-020RS, Z-011RS, Z-014RS
• Option: 1/4 inch male thread
• Replacement for the associated component location
• Match the tool version and existing component
• red left side cap: this side cap covers its assigned side of the handle body
• Fits Z-010RS, Z-010S, Z-014RS
• Option: red, left
• Replacement for the associated component location
• Match the tool version and existing component
• red right side cap: this side cap covers its assigned side of the handle body
• Fits Z-010RS, Z-010S, Z-014RS
• Option: red, right
• Replacement for the associated component location
• Match the tool version and existing component
• O-ring 3.5 x 1.5 mm: this O-ring seals its assigned connection in the tool
• Fits Z-010RS, Z-020RS, Z-007, Z-011RS, Z-010S, Z-020S, Z-020, Z-014RS
• Option: 3.5 x 1.5 mm
• Replacement for the associated component location
• Match the tool version and existing component
• valve bushing: this bushing provides a seat or guide within the valve section
• Fits Z-010RS, Z-020RS, Z-011RS, Z-010S, Z-020S, Z-010, Z-020, Z-014RS
• Identification: Z-010RS, position 11
• Replacement for the associated component location
• Match the tool version and existing component
Tornador Ersatzteil Nr.: SPZ010015A
• trigger valve stem: the valve stem is part of the compressed air valve mechanism
• Fits Z-010RS, Z-020RS, Z-011RS, Z-010S, Z-020S, Z-010, Z-020, Z-014RS
• Identification: Z-010RS, position 13
• Replacement for the associated component location
• Match the tool version and existing component
• valve gasket: this gasket serves the assigned connection or valve location
• Fits Z-010RS, Z-020RS, Z-007, Z-011RS, Z-010S, Z-020S, Z-010, Z-020, Z-014RS
• Identification: Z-007, position 11
• Replacement for the associated component location
• Match the tool version and existing component
• side cap screws 4 pieces: this screw secures the associated components at their designated connection
• Fits Z-010RS, Z-014RS
• Pack quantity: 4 pieces
• Replacement for the associated component location
• Match the tool version and existing component
• side cap screws 4 pieces: this screw secures the associated components at their designated connection
• Fits Z-010RS, Z-014RS
• Pack quantity: 4 pieces
• Replacement for the associated component location
• Match the tool version and existing component
• lower handle screw: this screw secures the associated components at their designated connection
• Fits Z-010RS, Z-020RS, Z-011RS, Z-010S, Z-020S, Z-014RS
• Identification: Z-010RS, position 18
• Replacement for the associated component location
• Match the tool version and existing component
• side cap screws 4 pieces: this screw secures the associated components at their designated connection
• Fits Z-010RS, Z-014RS
• Pack quantity: 4 pieces
• Replacement for the associated component location
• Match the tool version and existing component
• air regulator retaining screw: this screw belongs to the air adjustment mechanism in the handle
• Fits Z-011RS, Z-020RS
• For the earlier RS version with air regulator
• Replacement for the associated component location
• Match the tool version and existing component
• air regulator nut: this nut retains its assigned threaded connection on the tool
• Fits Z-011RS, Z-020RS
• For the earlier RS version with air regulator
• Replacement for the associated component location
• Match the tool version and existing component
• O-ring 9.5 x 1.5 mm: this O-ring seals its assigned connection in the tool
• Fits Z-010RS, Z-020RS, Z-011RS, Z-010S, Z-020S, Z-014RS
• Option: 9.5 x 1.5 mm
• Replacement for the associated component location
• Match the tool version and existing component
• RS regulator screw: this screw belongs to the air adjustment mechanism in the handle
• Fits Z-011RS, Z-020RS
• For the earlier RS version with air regulator
• Replacement for the associated component location
• Match the tool version and existing component
• air regulator valve stem: this valve stem belongs to the handle air regulator on the earlier RS version
• Fits Z-011RS, Z-020RS
• For the earlier RS version with air regulator
• Replacement for the associated component location
• Match the tool version and existing component
• O-ring 7 x 1.5 mm: this O-ring seals its assigned connection in the tool
• Fits Z-011RS, Z-020RS
• For the earlier RS version with air regulator
• Replacement for the associated component location
• Match the tool version and existing component
.webp)
• O-ring 4.8 x 1.9 mm: this O-ring seals its assigned connection in the tool
• Fits Z-011RS, Z-020RS
• For the earlier RS version with air regulator
• Replacement for the associated component location
• Match the tool version and existing component
Find the right Tornador Classic Z-010RS spare parts
The Tornador Classic Z-010RS page combines a parts illustration with a product list. Locate the affected assembly first, then compare the position number, version and model information in the listing.
How to identify the correct component
For the cleaning end, look for the nozzle, blue rotating tube and inner hose. Control and air supply components include the threaded valve, trigger, valve stem, spring and swivel air connector. The range also covers housing, side covers, cup components, seals and O-rings. Select the correct nozzle version and the correct left or right cover. Check O-ring dimensions and use the illustration position to distinguish similarly named screws.
For a Basic or Black tool, start at the model overview.
Order the matching part online or buy available parts at carparts.koeln in Cologne. Find the store on Google Maps.
