Mirka Abralon fine sanding disc Ø 77 mm 20 pieces

Alternative:

3M Trizact Feinschleifscheibe / Ø 75 mm / VE 15 pieces

from 62,65 € *

4,18 € per 1 piece/s

Fits with:

carparts Stützteller Ø 75 mm M6 mit Schaft

11,90 € *

carparts transparent bucket 20 liters

from 19,95 € *

carsystem foam pressed

only 2,30 € *

carsystem Soft Interface Pad Ø 73 mm

only 5,87 € *

Grippaz Nitrile Protective Gloves, powder-free, latex-free, black, pack of 50

12,90 € *

0,26 € per 1 piece/s

Kwazar Mercury Super Pro+ 360° Sprühflasche 1,0 Liter

10,95 € *

ShineMate DA Polishing machine EB212 Kit cordless eccentric

389,00 € *

Variantion:

Mirka Abralon fine sanding disc Ø 77 mm 1 piece

2,95 € *

Mirka Abralon fine sanding disc Ø 150 mm P 500 - P 4000 / 1 piece

4,15 € *

Mirka Abralon KIT P 500 - P 4000 Ø 75 mm - je 1 Stück

11,30 € *

2,26 € per 1 piece/s

Mirka Abralon fine sanding disc Ø 77 mm 20 pieces

SKU: V8A20302051

Elastic abrasive Abralon delivers excellent results
For small damage repair and spot repair
Removes overspray and orange peel
Post-treatment for paint pens
All Abralon discs also available as 1 piece

Select a variant:

only 38,54 €

1,93 € per 1 piece/s

incl. 19% VAT , plus

RRP: 45,34 €

Available - pickup ready

Category::
- Eccentric disc Fine abrasive

ABRALON is a unique specialty product for finishing sanding. ABRALON reduces conventional polishing procedures to a minimum, resulting in significant time savings and cost reductions.

Typical applications include high-gloss paints, mineral materials, and gel coats. ABRALON's construction consists of the abrasive net, foam center, and hook-and-loop backing. The abrasive grains are attached to the net. The openings in the abrasive net allow water and air to move freely around the abrasive grains during surface sanding. ABRALON is excellent for rounded surfaces, corners, and sharp edges. During dry sanding, the abrasive net moves continuously, preventing the buildup of sanding dust. Surface cleaning is easily achieved with compressed air.

When ABRALON is used for wet sanding, the open cell structure compresses, pushing water into the foam center through the openings in the abrasive net. When the foam expands again, the liquid is absorbed back. This constant movement of water in and out keeps the product clean and extends its lifespan.

Manufacturer information: Name: Mirka GmbH
Street name: Otto-Volger-Straße 1a
Postal code, City: 65843 , Sulzbach / Taunus
Country: Deutschland
State: Hessen