FLEX PE 14 LD C rotary polisher

FLEX PE 14 LD C rotary polisher for powerful paint correction

The FLEX PE 14 LD C is a powerful corded rotary polisher designed for professional car detailing and demanding paint correction. Its 1,400 W motor, direct rotary action and speed range from 1,100 to 3,700 rpm provide high and controllable correction performance.

The machine is particularly suitable for removing deep scratches, sanding marks, oxidation and severe weathering. Depending on the backing pad, polishing pad and compound used, it can work with polishing pads from 75 to a maximum of 150 mm.

1,400 W motor with constant speed under load

The powerful motor provides the reserves required for intensive polishing work. A high-performance fan supports efficient motor cooling during extended applications.

The VR microprocessor electronics use a tachogenerator to maintain the selected speed as consistently as possible under load. The electronic functions include:

• Tachogenerator-controlled constant speed
• Speed preselection using a dial accessible from both sides
• Accelerator trigger for a controlled start
• Soft start
• Overload protection
• Temperature monitoring
• Restart protection following a power interruption

Use polishing pads from 75 to 150 mm

Smaller polishing pads starting at 75 mm are suitable for narrow or curved areas such as bumpers, pillars, motorcycle tanks and sections around door handles. Pads with a diameter of 125 or 150 mm allow efficient correction of larger panels including bonnets, roofs, doors and quarter panels.

The standard supply includes a cushioned 150 mm hook-and-loop backing pad with an M14 fitting.

Flat gear head for controlled handling

The flat gear head reduces the distance between the machine and the paint surface, helping the operator guide the polisher securely in different working positions. Its slim grip area improves control over the pad, pressure and direction of movement. A rubberised resting bar allows the machine to be set down safely during pad changes.

Recommended polishing pads and compounds

• Heavy paint correction: heavy-cut compound with a firm foam, wool or microfibre pad
• Medium paint defects: medium-cut polish with a medium-density foam pad
• Gloss refinement: finishing polish with a soft polishing pad

After an intensive rotary polishing stage, sensitive or dark paint may benefit from an additional finishing step with a dual-action polisher. This can help remove possible holograms and create a more uniform high-gloss finish.

FLEX PE 14 LD C technical data

Standard supply

• 1 piece FLEX PE 14 LD C rotary polisher
• 1 piece cushioned FLEX M14 hook-and-loop backing pad, 150 mm, order number 535703

Rotary polishing instructions

Thoroughly clean and decontaminate the vehicle paint before polishing. Mask sensitive plastic parts, rubber seals and sharp paint edges. Start with a small test section and select the least aggressive pad and polish combination capable of producing the required correction.

Centre the polishing pad on the backing pad and place it against the paint before starting the machine. Work on manageable sections, keep the pad as flat as possible and regularly monitor the paint temperature. Rotary polishers can generate high correction performance and increased heat, so controlled operation is essential.

Buy in store: Subject to availability, the FLEX PE 14 LD C can also be purchased or collected from the carparts.koeln store in Cologne. Visit store location and parking information or open the location directly in Google Maps.

Order the FLEX PE 14 LD C from carparts.koeln now and complete demanding paint correction work efficiently.