SONAX CeramicCoating CC Pro 50 ml

SONAX PROFILINE CeramicCoating CC Pro 50 ml - professional ceramic coating

SONAX PROFILINE CeramicCoating CC Pro 50 ml is a high-performance ceramic paint coating developed for experienced users and professional detailers. A single layer creates a durable protective finish that can provide up to 4 years of protection when the paintwork is correctly prepared and the product is professionally applied.

The coating enhances colour depth, produces a deep gloss and leaves the paint surface exceptionally smooth. Its strong hydrophobic properties help water bead off quickly and reduce the adhesion of dirt. This makes regular vehicle maintenance easier and helps the paint retain its well-maintained appearance for longer.

Efficient application for professional results

CC Pro features a formula designed for a short reaction time with the paintwork. This enables an efficient coating process without an additional dwell time. After applying a thin and even layer in a crosshatch pattern, excess product can be removed immediately with a suitable coating towel.

The 50 ml content is sufficient for up to 2 complete vehicles. The set also includes 4 application sponges. If an applicator begins to harden during use, it should be replaced with a fresh sponge.

Benefits of SONAX CeramicCoating CC Pro

• Professional ceramic long-term protection for automotive paint
• Up to 4 years of durability when correctly applied
• Only one coating layer required
• Strong water- and dirt-repellent properties
• Supports the self-cleaning behaviour of the surface
• Enhances colour depth, gloss and surface smoothness
• Short reaction time for efficient application
• Developed for professional detailers and experienced users

Application instructions

Thoroughly clean the paintwork and, if necessary, machine polish it to achieve a scratch-free and hologram-free deep gloss. Immediately before coating, the surface must be completely clean, dry and free from oils. SONAX PROFILINE Prepare can be used for the final surface preparation.

Apply a few drops of CC Pro to the light side of the application sponge. Spread a thin layer in a crosshatch pattern over an area of approximately 0.5 m². Remove excess product immediately with a clean coating towel until the surface is streak-free.

After the entire vehicle has been treated, allow the coating to cure for at least 2 hours in a clean and dry environment. Do not touch the surfaces during this period. Do not wash the vehicle for the first 7 days and avoid highly alkaline cleaners afterwards.

Important: Ensure adequate ventilation during application. The product can be applied from +10 °C, while the optimum application temperature is between 20 and 30 °C. Do not use on hot surfaces and do not allow the coating to dry before removal.