Skip to consent manager Skip to main content Skip to search Skip to category navigation Skip to footer

Fits with:

blanc car F93 Degreaser / APC Concentrate
from 14,90 € *
Available - pickup ready
Go to item
FLEX VC 21 L MC, Safety vacuum cleaner with manual filter cleaning system, 20 l, class L
only 221,52 € *
Available from the manufacturer
ProfiPolish Basic polishing-towel green 10 pcs
15,90 € *
1,59 € per 1 piece/s
Available - pickup ready
Go to item
Tornador Z-007 Mini Cleaning Gun
70,21 € *
Available - pickup ready
Torndaor Z-007 Weighted Tube Ass'y
16,28 € *
Available - pickup ready
Tornador Nozzle green
6,57 € *
Available - pickup ready
Tornador Z-007 Mini Frame
  • SKU: SPZ007001

Stable grip and protected internals after replacement

  • Matching replacement part for the Tornador Z-007 Mini cleaning gun
  • Your replacement option if the housing has cracks, break points, or worn-out screw mounts
  • Restores stability, handling, and protection of the internal components
  • A clean repair solution instead of buying new - especially worthwhile in everyday professional use
  • Selection guide for all spare parts for the Z007 via technical drawing / mouseover
8,93 €
incl. 19% VAT , plus shipping costs
Available from the manufacturer
Delivery time: 1 - 3 workdays * (DE - int. shipments may differ)

Tornador Z-007 Mini housing as a replacement part - when the original housing is damaged

The Tornador Z-007 Mini housing is the right replacement part if the housing on your Tornador Z-007 Mini cleaning gun is damaged or no longer fits properly after many uses. Especially in everyday detailing and reconditioning work, it can happen quickly: a drop off the cart, an unfortunate bump against the lift, or repeatedly tightening screws - and cracks, play, or loose mounting points appear. Replacing the housing brings back stability and a solid feel to the gun, without having to replace the entire tool.

More stability and better handling - replace the housing instead of the whole tool

An intact housing mainly ensures two things: safe handling and reliable protection of the internal assemblies. If the housing is warped, the feel can worsen, components may sit less securely, and in the worst case everyday usability suffers. This replacement housing is designed to restore the original fit and stability- so the tool feels “right” again and remains dependable in use.

Typical use cases in vehicle detailing - interiors, edges, and tight spots

Replacement is especially worthwhile if you use the Z-007 regularly for interior work and hard-to-reach areas such as air vents, seat rails, or door jambs. In a solid care routine, the Tornador is often one step in the process: blow out/loosen debris first, then work with an interior cleaner, and finally wipe up with a microfiber towel. A stable housing helps you carry out these steps in a controlled way - without annoying wobble.

Who this replacement housing is for - and when other wear parts should be checked

For detailers, workshops, and enthusiasts who want to keep their Tornador Z-007 Mini in good working order. Important to note: the housing does not fix functional problems caused by other wear parts (e.g., nozzles, valves, seals). If more than just the housing is affected, also check the other components in the spare-parts overview or technical drawing.

Manufacturer information: Name: Bendel Werkzeuge GmbH & Co. KG
Street name: Wilhelm-Schulze-Straße 8-10
Postal code, City: 29549 , Bad Bevensen
Country: Deutschland
State: Niedersachsen

Our guide – overhaul your Z007 with genuine spare parts

  1. Disconnect the compressed-air supply and make sure there is no residual pressure.
  2. Clean the cleaning gun on the outside so no dirt can get inside when you open it.
  3. Carry out disassembly according to the manufacturer’s instructions: note screw positions and order, and use the exploded view if needed.
  4. Remove the damaged housing and check all parts to be reused (e.g., lever/controls, inserts, screws) for wear.
  5. Install the new housing, insert components correctly, and tighten the screws evenly.
  6. Visual inspection: correct fit, no tension, and no pinched lines/hoses/seals.
  7. Start a function test with compressed air at a low setting and check for leaks and smooth operation.
Tornador Z-007 Mini Frame
Tornador Z-007 Mini Frame
8,93 € *

Reviews:

We want to ensure that you are fully satisfied with our high-quality car care products. After you've tested them, we look forward to hearing your opinion. Support others in their purchasing decision by leaving the first review for this item. We are eager to hear your feedback!:

Loading ...