RUPES BigFoot LHR15ES DA Polisher Single Machine

Fits with

RUPES BigFoot carbon brush kit for LHR12E, LHR15ES/LHR15 Mark III, LHR21ES/LHR21 Mark III, LHR75E, LH19E

16,18 € *

8,09 € per 1 piece/s

RUPES BigFoot Backing Plate Ø 125 mm for LHR12E / LHR15

only 44,87 € *

RUPES D-A COARSE High Performance Coarse Cutting Pad

from 7,58 € *

3,79 € per 1 piece/s

RUPES D-A COARSE High Performance Cut - Polish Compound - Schleifpaste

from 17,14 € *

68,54 € per 1 l

RUPES Replacement Cap for LHR15ES

36,06 € *

RUPES cable clip

5,09 € *

RUPES Tool Holder

only 44,55 € *

RUPES BigFoot LHR15ES DA Polisher Single Machine

SKU: LHR15ES

The RUPES Allround model from the BigFoot Series with a Ø15 mm orbit
Equipped with a Ø125 mm backing plate, perfect for all surfaces on cars, caravans, boats, and planes
High sanding performance due to increased speed with balanced and vibration-free operation
A must-have for every detailer and car enthusiast
Random Orbital = Free disc rotation through centrifugal force, best surface treatment, elegant design
Antispinning carbon-design protection hood, electronic speed control module & On-Off switch lock for comfort

only 386,51 €

incl. 19% VAT ,

RRP: 471,24 €

Available now / Ready for pickup

Deliverydate: 12.05.2026 - 15.05.2026 (DE - int. shipments may differ)

Grinding stroke:
- 15 mm
Category:
- Random orbital polisher

The Ø15 mm orbit and the RUPES Ø125 mm backing pad make the random orbital polisher particularly suitable for curved surfaces. The 15mm orbit of the LHR 15ES, shorter than that of its big brother the LHR 21ES, is coupled with a higher rpm level than that of the LHR 21ES. This higher speed gives the LHR 15ES equivalent cutting power to the LHR 21ES, despite of the smaller orbit. Its Ø130/150 mm BigFoot polishing foam pads, perfect balance and vibration-free operation make the LHR 15ES a real gem and a must for the tool kit of every detailer.

RANDOM ORBITAL
The backing plate follows an orbit (the amplitude of which depends on the distance between the rotation axis of the drive shaft and the central axis of the backing plate) and is free to rotate about its own central axis. The backing plate is free to rotate at varying velocities and directions by effect of the centrifugal force of the offset movement and by effect of friction. Should the friction forces be such as to prevent rotation of the disc while the tool is still operating, the random orbital movement would simply become an orbital movement. The number of disc rotations is variable and independent of the number of orbits performed. The random orbital movement is at present the best compromise in terms of effectiveness and surface treatment quality.

ELEGANTLY DESIGNED
The RUPES R&D and Design departments have paid particular attention to the design and ergonomics of the BigFoot polishers. The perfectly balanced machine body, the practical handgrip, the silent operation and minimum vibration are just some of the characteristics that help make BigFoot the market’s most versatile and sought-after system.

ANTISPINNING SHROUD
The dual function antispinning shroud is designed to protect the operator against the moving parts and act as a clutch for the backing pad, preventing further stress on the foam polishing pad when it is not in direct contact with the surface.

ELECTRONIC SPEED CONTROL MODULE
The speed controller on the handle is both practical and easy to use. The speed of the polisher can also be regulated during use, thus avoiding any interruption of the polishing operation.

ON-OFF SWITCH LOCK
Pressing the button on the LEFT-hand side of the handgrip while polishing locks the on-off switch. This allows the operator to move his/her hands freely to different gripping positions while the tool is operating.

DESIGN
The attention to detail is not limited to just the innovative and attractive design. The modern lines and exceptional technical quality are combined with a number of details that are the result of meticulous research aimed at achieving maximum operator comfort.

Manufacturer information: Name: Rupes SPA
Street name: Via Marconi 3A
Postal code, City: 20071 , Vermezzo con Zelo (MI)
Country: Italien

Ø backing pad in 5″
Ø orbit 19/32″
Power W 500
R.P.M. 2000-5000
Weight lbs 5,73
Conjunction M8

Random orbital polisher (Ø125mm - Ø5”- 15mm orbit)(LHR15ES)

RUPES BigFoot LHR15ES DA Polisher Single Machine

only 386,51 € *

Add to basket