Leather Color Alfa Romeo

Leather brush:

Braun Automotive Leather brush black

17,90 € *

GYEON Q²M LeatherBrush

5,00 € *

Colourlock Leather cleaning brush

8,90 € *

Wizard of Gloss Premium Soft Textile and Leather Brush

7,95 € *

Leather cleaner

COLOURLOCK Degreaser 250 ml

15,90 € *

63,60 € per 1 l

COLOURLOCK Pol Star - Textil / Leder / Alcantarareiniger 250 ml

6,90 € *

27,60 € per 1 l

Leather care:

COLOURLOCK Elephant Leather Preserver 125 ml

18,90 € *

145,42 € per 1 l

COLOURLOCK Leather Protector Milk

from 12,90 € *

129,00 € per 1 l

Fits with:

COLOURLOCK Fluid Leather Flüssigleder 20 ml

45,90 € *

2.295,00 € per 1 l

COLOURLOCK Leather Fresh neutral 1 Liter

69,90 € *

Indasa Red Line Naßschleifpapier 1 piece

1,35 € *

Leder FarbScan - Rezeptur & 100 ml

80,00 € *

800,00 € per 1 l

Leather Color Alfa Romeo

SKU: VLF-ALFA

Water-Based Alfa Romeo Leather Dye - Tint, Touch Up and Colour

Refresh the colour of leather seats and upholstery, and neatly recolour smooth leather
100 ml is sufficient for approx. 1-2 seat units - depending on the absorbency of the leather
Even application and colouring from seam to seam
Water-based and practical to apply - ideal for interior detailing

Select a variant:

Color name:: Color name:

Contents_: 100 ml 100 ml 200 ml 200 ml 300 ml 300 ml 400 ml 400 ml 500 ml 500 ml 1,0 Liter 1,0 Liter

from 19,95 €

199,50 € per 1 l

incl. 19% VAT , plus

Available - pickup ready

Content:
- 200 ml 100 ml 300 ml
Category:
- Leather color

Dyeing leather seats in cars - refresh smooth leather and neatly recolour automotive leather

Anyone looking to dye leather seats or recolour automotive leather usually wants one thing: to make faded, stained, or uneven areas look consistent again. This water-based leather dye is designed exactly for that purpose. It is suitable for refreshing the colour and dyeing smooth leather - including gentle recolouring when a shade needs to be adjusted slightly. 100 ml is sufficient for approx. 1-2 seat units, depending on the absorbency of the leather.

Water-based leather dye - what it can do and where its limits are

Even colour appearance when dyeing seat leather

When dyeing leather in a car, the aim is controlled blending: seat bolsters, entry areas or armrests appear more even again after drying and look less “shiny” or washed out. Especially when dyeing seat leather, clean and careful application is important so that the surface looks calm and matt.

Realistic expectations when dyeing leather in cars

A leather dye does not replace the repair of deep cracks or missing material. Damaged areas or sections that have been treated, for example, with liquid leather should be dyed first - afterwards, the entire surface is blended. This makes the result when recolouring automotive leather logical and harmonious.

Preparation is key when dyeing leather

Cleaning and degreasing – so the leather dye adheres properly

Before dyeing smooth leather, the surface must be clean and free of grease. In car interiors, body oils, care product residues, and dirt often build up on the leather – this can lead to stains or uneven coverage when dyeing. Thorough cleaning is therefore essential. For proper preparation, using a leather prep product or cleaner is recommended before applying the dye.

Maintain proper temperature

The ambient temperature should not fall below 10°C, otherwise the leather dye may not dry properly.

Application – dyeing leather from seam to seam with a sponge

Application, control, and reworking

Apply the leather dye to the included sponge and work it in using circular motions from seam to seam. Treat the entire surface and then check where coverage is still lacking. Rework those areas – but only once the first layer is completely dry. Otherwise, the initial coat may be reactivated and smudge.

Drying, optional with a hairdryer, and second application

Without a hairdryer, drying time is about 1–2 hours. To speed things up, you can use a hairdryer: lowest, warm setting and keep about 20 cm distance until the surface appears matte. A second application can enhance the result and further improve color matching.

Seal after dyeing leather – protection for everyday use

After complete drying, you can apply a sealant. Sealing improves everyday durability by protecting the newly dyed surface from abrasion and renewed soiling. This way, leather dyeing fits cleanly into your routine: clean and prepare, dye, allow to dry, and then protect.

Manufacturer information: Name: Colourlock - Koch‑Chemie GmbH
Street name: Einsteinstr. 42
Postal code, City: 59423 , Unna
Country: Deutschland
State: Nordrhein-Westfalen

Leather Color Alfa Romeo

Leather brush:

Leather cleaner

Leather care:

Fits with:

Water-Based Alfa Romeo Leather Dye - Tint, Touch Up and Colour

Dyeing leather seats in cars - refresh smooth leather and neatly recolour automotive leather

Water-based leather dye - what it can do and where its limits are

Even colour appearance when dyeing seat leather

Realistic expectations when dyeing leather in cars

Cleaning and degreasing – so the leather dye adheres properly

Maintain proper temperature

Application – dyeing leather from seam to seam with a sponge

Application, control, and reworking

Drying, optional with a hairdryer, and second application

Seal after dyeing leather – protection for everyday use

Reviews:

Be the first to rate this! Your review helps us and others!