Q² Syncro is GYEON's most advanced ceramic coating for enthusiasts and detailing professionals, available to everyone and not just a limited customer base. A sophisticated 2-step formula delivers great results with minimal effort.
The aim of this coating is to offer a professional coating system to all customers outside the Certified Detailer programme. The multi-layer application finishes with the application of Q² Skin, an advanced silicone-based topping that provides exceptional smoothness and hydrophobicity. Despite the three-layer application, both base and top coats are user-friendly and easy to apply.
Q² Syncro offers incredible smoothness and water repellency. The base component Q² Mohs provides hardness and enduring durability. The topping Q² Skin is a thick and flexible top coat with excellent self-cleaning properties. It is this self-cleaning ability that keeps your car looking its best between regular washes, as pollutants are less likely to adhere and therefore run off easily. Thus, cleaning your car will be more effortlessly and most dirt will be removed by a simple high-pressure wash.
Q² Syncro is currently the most advanced and longest lasting coating in the GYEON range and is available to everyone. However, a certain experience in coatings is advisable, as it is necessary to apply several coats in succession.
- Durability: >24 months or 35tkm
- thickness: 0.2-0.5µm per layer
- pH tolerance: 2-11
- contact angle: >120°
- hardness: +3H
- Consumption: 30ml/vehicle
- Two-component sealant, min. 2 coats of Mohs required
-1 piece GYEON Q² Mohs 100 ml
-1 piece Q²Skin 50 ml
-1 piece Instruction manual
The better the surface is prepared, the better the result in terms of gloss, durability and beading effect.
-Thorough pre-wash and decontamination with Q²M Foam, Q²M Tar, Q²M Iron, Q²M Clay.
-Polish all painted surfaces to a high gloss with Q²M Polish and, if necessary, Q² Primer.
-Wash the vehicle with a strongly degreasing detergent, e.g. dishwashing liquid and hot water.
-Remove all dirt, waxes and oily polish residues with Q²M Prep (IPA alone is not enough).
-Shake bottle, put a few drops of Q² Mohs on the suede cloth wrapped around the applicator
-Apply in a criss-cross pattern until the coat is saturated and even, working on smaller areas at a time.
-After 10-30 seconds, buff out excess with fresh Q²M BaldWipe microfibre cloth to achieve an even finish
-Apply at least one more coat after at least 1 hour. One more coat increases the thickness and hardness. Apply Q² Mohs in a maximum of 3 coats.
-Apply a thick coat of Q² Skin after at least 4 hours. Work in a cross-coat pattern. Wipe off immediately and carefully, do not leave any streaks or stains. Divide larger areas (roof, bonnet, SUV doors) into sections, work carefully.
-Let the coating dry for at least 12 hours. There is no need to apply Q²M Cure, although it remains an excellent product for maintenance.
-Avoid water during the drying period (24 hours), do not wash with car shampoo during the curing period (14 days).
Be the first to rate! Your review helps us and others!
Your opinion is very important to us! We want to make sure that you are fully satisfied with our car care products. Let us know what you think after you have tested the product and share your experience with our community. Be the first to review this product and help others make the right decision. We are looking forward to your feedback!