After two years of intensive R&D, it was time to boost the Gyeon coating spectrum to a new level: presenting a technological rEVOlution in the chemical group of polysilazanes, Gyeon has succeeded both in almost doubling the durability and simplifying the application process: wipe off time has been drastically extended with the new EVO formulations.
What's more: all new EVO coatings no longer require a two-layer application but only one single layer, and what's more, they can even be applied outdoors in the fresh air; a garage is no longer a mandatory requirement. The only thing to ensure is a dry place for the following 12 hours and some shade for the application.
The legendary Q² CanCoat Pro EVO is the easiest entry into the world of ceramic coatings. This idiot proof spray sealant creates a richer colour, enhances the shine and gives the paint more depth. After drying time, the product leaves an absolutely smooth protective layer that will impress you.
Q² CanCoat Pro EVO provides car paints with protection against UV radiation, strong chemicals, bird droppings, road salt and oxidation. It retains its water-repellent and self-cleaning properties for up to 12 months or 12,000 km.
Simply spray on the enclosed microfibre cloth and spread on the paintwork until it reaches a high gloss - it's that easy to apply Q² CanCoat Pro EVO! It is an exceptionally durable silica-based sealant, conveniently packaged in a pump spray bottle and can be used on almost any surface: Paint, Metal, Vinyl/Foil, Plastic, Carbon. It is just as effective as a stand-alone sealant as it is as a topping to an existing coating.
- Durability: up to 18 months/18tkm
- Consumption: 30ml/vehicle
- 1 Stück GYEON Q² CanCoat Pro EVO 200 ml
- 3 Stück GYEON Sprühköpfe
- 1 Stück GYEON Mikrofaser Poliertuch 40 cm x 40 cm
Je besser die Fläche vorbereitet ist, umso besser ist das Ergebnis im Bezug auf Glanz, Standzeit und Abperleffekt
- Gründliche Vorwäsche und Dekontamination mit Q²M Foam, Q²M Tar, Q²M Iron, Q²M Clay
- Alle lackierten Oberflächen auf Hochglanz polieren mit Q²M Polish und ggf Q² Primer
- Fahrzeug waschen mit stark entfettendem Waschmittel, z.B. Geschirrspülmittel und Heißwasser.
- Sämtliche Verschmutzungen, Wachse und ölhaltige Politurrückstände mit Q²M Prep entfernen (IPA allein reicht nicht)
- Flasche schütteln, ein bis zwei Sprühstöße Q² Cancoat EVO auf das beiliegende Mikrofasertuch geben
- Produkt gleichmäßig auf dem Lack verteilen, dabei immer nur kleinere Teilflächen bearbeiten
- Nach 10-30 Sekunden mit weiterem weichen Mikrofasertuch nachgehen um eventuelle Überschüsse auszupolieren
Be the first to rate! Your review helps us and others!
Your opinion is very important to us! We want to make sure that you are fully satisfied with our car care products. Let us know what you think after you have tested the product and share your experience with our community. Be the first to review this product and help others make the right decision. We are looking forward to your feedback!