GYEON Q² CanCoat PRO 200 ml

  • ART.NR.: Q2CCPRO200
Content: 200 ml
Trader packaging unit: 12 units
Warnings according CLP regulation
H226
H319
H304|H373|H361d
DANGER!
  • H226 Flammable liquid and vapour.

  • H319 Causes serious eye irritation.

  • H304 May be fatal if swallowed and enters airways.

    H373 May cause damage to organs.

    H361d Suspected of damaging the unborn child.

  • H412 Harmful to aquatic life with long lasting effects.

  • Available immediately
Sales only after certification
Shipping methods payment payment
Description

Das legendäre Q² CanCoat jetzt auch neu in der Professional Version mit verlängerter Standzeit und verstärktem Glanz!

Q² CanCoat Pro lässt sich sehr leicht auftragen bei gleichzeitig optimalem Ergebnis. Die Sprühversiegelung erzeugt auf dunklen Lacken einen satteren Farbton, verstärkt den Glanz und gibt dem Lack mehr Tiefe. Hellere Lacke erhalten eine glatte Optik mit ebenfalls mehr Tiefe. Nach der Trocknungszeit hinterlässt das Produkt eine absolut glatte Schutzschicht.

Q² CanCoat Pro versieht Autolacke mit einem Schutz vor UV-Strahlung, starken Chemikalien, Vogelkot, Streusalz und Oxidation. Es behält seine wasserabweisenden und selbstreinigenden Eigenschaften bis zu 12 Monate oder 20.000 km lang.

Einfach auf das beiliegende Microfasertuch sprühen und auf dem Lack bis zum Hochglanz verteilen - so einfach ist die Anwendung von Q² CanCoat. Es ist eine außergewöhnlich haltbare Versiegelung auf Basis von SiO2, handlich verpackt in einer Pumpsprühflasche und auf nahezu allen Oberflächen anwendbar: Lack, Metall, Vinyl/Folie, Kunststoff, Carbon. Es kann als Standalone Coating appliziert werden oder aber auch wie schon immer gern als Top Coating bei einer Wiederauffrischung.

  • Standzeit: bis zu 12 Monate/20tkm
  • SiO2-Gehalt: >10%
  • Kontaktwinkel: >110°
  • pH Toleranz: pH 2-11
  • Verbrauch: 25ml/Fahrzeug

-1 piece GYEON Q² CanCoat PRO 200 ml
-3 pieces GYEON spray heads
-1 piece GYEON microfibre polishing cloth 40 cm x 40 cm

The better the surface is prepared, the better the result in terms of gloss, durability and beading effect.

-Thoroughly pre-wash and decontaminate with Q²M Foam, Q²M Tar, Q²M Iron, Q²M Clay.
-Polish all painted surfaces to a high gloss with Q²M Polish and if necessary Q² Primer.
-Wash the vehicle with a strongly degreasing detergent, e.g. dishwashing liquid and hot water.
-Remove all dirt, waxes and oily polish residues with Q²M Prep (IPA alone is not enough).
-Shake bottle, apply one or two sprays of Q² Cancoat Pro to the enclosed microfibre cloth.
-Spread the product evenly over the paintwork, working on smaller areas at a time.
-Follow up after 10-30 seconds with another soft microfibre cloth to polish out any excess.

Contact data
Question about item
Other customers also bought
Reviews

Be the first to rate! Your review helps us and others!

Your opinion is very important to us! We want to make sure that you are fully satisfied with our car care products. Let us know what you think after you have tested the product and share your experience with our community. Be the first to review this product and help others make the right decision. We are looking forward to your feedback!